Our Promise To You

Our Environmental Promise: We use Forest Stewardship Council certified woods or woods salvaged from downed trees. All our boards are glassed with epoxy resin which is cleaner for our environment and emits 50-75% less Volatile Organic Compounds than polyester resin. In our shop we have moderate ventilation and no need for a mask when glassing. Epoxy is lighter and stronger than polyester. Our wood boards are nearly indestructible and should last a lifetime. Each board is quality crafted for strength, durability and concern for our environment.

Your Satisfaction Promise: Ride our boards for 30 days. If you don't like it, return it.

CONTACT: Dan Johnston (01-910-575-6682) BlindDogSurfboards@yahoo.com Tom Allen (01-404-229-4223) Blinddogsurfboards@hotmail.com

All images are copyright protected and my not be used without permission from Blind Dog Surfboards.


Wood Pile - Sticks for Sale


Our Environmental Promise: We use Forest Stewardship Council certified woods or woods salvaged from downed trees. All our boards are glassed with epoxy resin which is cleaner for our environment and emits 50-75% less Volatile Organic Compounds than polyester resin. In our shop we have moderate ventilation and no need for a mask when glassing. Epoxy is lighter and stronger than polyester. Our wood boards are nearly indestructible and should last a lifetime. Each board is quality crafted for strength, durability and concern for our environment.

Your Satisfaction Promise: Ride our boards for 30 days. If you don't like it, return it.

=============================================== 

9'2" x 23" x 3 1/4"

Model: Chelsea

Sold

All an all cedar board with Australian Lacewood for the Sun. It's 9'2" x 23" x 3" Nose Rider, model Chelsea. Concave nose and slight V heading to tail. Nose has little more nose rocker than traditional NR boards, mainly for the choppy water we surf and lack of point breaks. Tail rocker starts later than most NR, found it does a nice job of moving water out of riders waves on cut backs. The nose will have 80/20 foil, tapering into 50/50 pinched rail then with about 5/90 on the tail for more nose lift. Nose at 12" is 18" and at tail 16". Tail block is 9"


 








 

From tail block right side looking forward to show reverse foil for more nose lift.


Rising Sun tail block

 




 

 

================================================

9'1" x 23"x 3 1/4"  

Model: Chelsea

$1180

Nose rider with 18 1/2" nose and 15" tail. Single fin. Gor-Tex vent.  All Cedar coming in at 18.5 pounds w/o fin. Concave nose, slight V heading towards tail. Has slightly more nose rocker for less than perfect surf conditions, aka, beach breaks.  Easier to drop in while paddling into off-shore winds. Tail rocker starts later than many boards, provides one leg step-back for quick turns and wave adjustments. Nose rail foil is about 90/10, mid area about 50/50 and tail is 10/90. This gives added nose lifts and good rail holding. Our rail is a very pinched rail profile, much like an Alaia.

 

 


 


 



Bottom is the model board "Chelsea" one above is standard nose rider. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8' 8" x 22.75" x 3 3/8"

$1150

Just finished this board. It has a concave nose, turning into slight V at tail. Rail foil is 40/60 nose tapering to 50/50 pinched middle, tapering into down turn as it nears the rail. This board is all Western Cedar, with shell inlay and through the fin box leash holder. The vent is a Gore Tex for zero maintenance. This board weights 16.5 pounds.

 




 



Bottom is the 8' 8" showing rocker profile


===============================================

Mini-Simmons 5'8"

Raffled for Chris Crocker Surf Off 

Winner: Cy

Ocean Isle Beach, September 7,8 2013

 




Top








 

================================================

9'1" Nose Rider - Single Fin

 Sold

All Cedar, this board is 23.25" wide x 3 1/4" thick and weights 19.5 pounds. A carry over from traditional nose riders, the fin box is placed 4 1/2" from tail to aid in holding into wave face . Nose width at 12" is 19.5"  and tail width at 12" is 18"  



Kolin proud new owner of this board.

 

================================================

 

9'10" Nose Rider - Single Fin

Not for sale


All Cedar, this board is 24" wide x 3 1/4" thick and weights 21 pounds. A carry over from traditional nose riders, the fin box is placed 4 1/2" from tail to aid in holding into wave face . Nose width at 12" is 19"  and tail width at 12" is 18 1/2" with concave in the nose area shifting to slight V out the 8 1/2" tail. Unlike historical nose riders the rail foil starts at a 70/30 transiting into 60/40 than at the tail, about 30/70. We use pinched rails that are very much like an Alaia wood board. This profile, coupled with a thin tail area, makes the board easy turn while providing nose lift for nose riding
Very manoverable while quick to gain speed and hold through sloppy sections. Fun board to ride and looks awesome enough to hang as wall art
Sold w/o fin...sorry the fin is one I made and uses a rare type of wood. 


front
 

 




 

 


"""""""""""""""""""""""""""""""""""""""""""""""""

 

9' 6" Nose Rider

Sold 

I started this in early December. There is an exhibit in Raleigh, NC in March, that is being sponsored by NC Fine Arts Society  that we entered into, at least sent in an application for 3 dimensional art submission. I can just see their eyes rolling, "Must be something in the air in Calabash....a surfboard?"  Well we will see. This board is being built for that event. All the woods are matched and with exceptional grain patterns. If it doesn't make their cut, guess I'll just have to surf it. ;) Update: NC Fine Arts considered this superb craftsmanship but not art. 

Here is 4 frames per minute video of this build out.  Link to Video of how this board was built. This board is built with Western Cedar for strength, light weight and ability to create beautiful match booked panels. It is 23.5" wide, 3.25" thick, at nose is 18.5" and tail is 16", and has our Evo rail foils.  It will have 2+1 fin array but will probably be surfed with a Bing 10" Hatchet fin for larger waves and a wider dolphin style fin. 

Your Satisfaction Promise: Ride our boards for 30 days. If you don't like it, return it.






Sold  9'0" Competition Longboard

Built after our 8'4" Mini-Mal outline with very pinched (egg) rails. We have found with adding a tad bit of nose rocker and little flatter tail rocker, this kind of board is faster is sloppy sections, handles drops and sweet to lay a rail in on hard turns. There is enough bit to hold on turns but still rather loose. Cut out fin, 8.5" to 10" is perfect. Side bites are included, center fin is not. This kind of egg rail is not common on foam boards, to the degree we use, because it dings easily, not with wood. 


Board specs: 9'0"  23" wide, 3 3/8 thick, 17" at nose, 15" at tail, 8.5" tail. Rocker 3 1/2" front, 2 3/4" rear.
Slight V about last 1/3
About 50/50 first 1/3
80/20 mid 1/3
Hard last 1/3
Side bites set at 6 degrees
Weight: 18.5 pounds
4 oz glass top/bottom with Green Room epoxy.
Nose and tail blocks cedar and balsa
Board all cedar

 



Your Satisfaction Promise: Ride our boards for 30 days. If you don't like it, return it.







SOLD   7'6" Fish

All Cedar, fast, and just a hoot to ride, woody fish that is. Would look great on a wall of plaster or one of water. Perfect book matching woods. Try it for 30 days, do not like it...return it. 
 

 

Your Satisfaction Promise: Ride our boards for 30 days. If you don't like it, return it.






SOLD   6'5" Swallow Tail
Gone to Sandy Rose ESA-SNC member who won it in a raffle at Chris Crocker first annual surf-fest - July 15, 2012

This FCS Tri-Fin Swallow Tail is 22.5" wide and 2 7/8" thick. Crafted to be fast and maneuverable, she weights just 10.5 pounds. Made from selected Cedar, with Balsa and Mahogany nose and tail blocks with Abalone shell inlay. As with all our boards, try it for 30 days, if you are not satisfied, we will refund your money. In the following photos there are shadows from myself and trees behind me, not blems. Click on images to enlarge.

$675
 
 


 


 


 


 

Your Satisfaction Promise: Ride our boards for 30 days. If you don't like it, return it.

 


Sold

8'5" Mini-Malibu 


All Cedar wood for lightness and perfectly book matched for beauty. This board is 23" x 3 3/8" with moderate nose rocker to cut through wave chop yet not enough to slow you down. This board was build for maneuverability with pinched rails, 8" tail, flat bottom with slight V section at back 1/3 area. This board weights 17.5 pounds and sports Go-Pro side thrusters ( x" fins included. Go-Pro boxes can take FCS fins with minor mods to fins. I like Go-Pro as it allows you to adjust fin cant. This one with the deck having about 1to 2 degree can has 4 degree inserts already installed. Center fin is a 10" FCS box, no fin included. Sea turtle inlay is Abalone shell. 


  








Your Satisfaction Promise: Ride our boards for 30 days. If you don't like it, return it.






  9'7" Nose Rider
Email for price 

This board has been my personal daily rider since October 2011. It is 23" x 3 3/8" and weights 22 pounds. Cedar and "flamed mineral stained" Spruce, and with Cedar and Balsa nose and tail blocks. It has pinched rail foil that makes it highly maneuverable and helps board stay loose in turns and nose riding. We use only epoxy resin that is much better for our environment and much stronger than regular resin.  Ride this board for 30 days, if you don't like it return it and we'll return your money. 











Your Satisfaction Promise: Ride our boards for 30 days. If you don't like it, return it.


9'11" Long Board  
Sold
 
Hollow wooden board, 23.5"x3 3/8" with 7.5" square tail. Sweet nose rider and just great all around board for beach breaks. Spruce, Cedar, Poplar and Walnut, comes in around 26 pounds. Best surfed with FCS 10" Hatchet or Bing's 10.5" Hatchet fin.  Click on images to see details. 





Your Satisfaction Promise: Ride our boards for 30 days. If you don't like it, return it.




 7'6" x 22.5" Fish   Sold




 Spruce, Cedar with Walnut FCS style 6" fins. Weight is about 11 pounds.  It's hanging over at Sharky's restaurant at Ocean Isle Beach. 

Your Satisfaction Promise: Ride our boards for 30 days. If you don't like it, return it.



Sold 7'5" Fish
Epoxy and S2 Glass, wood glassed on fins. 22"x 3 3/8".  Poplar, Spruce and Cedar. Sweet body profile. Surf it or wall hang it, either way this board is a stunning. The woods are matched for color, grain beauty and strength.  Made In USA

Click on photos to enlarge.

$760 and can be shipped anywhere.
 Each board is hand crafted, no two are are the same. About 90 hours goes into each board. 
 

''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Sold.

" 23.5x3 spruce and cedar. This is 9'10my daily rider.

=======================================================================

We're working on 9' fish, couple of kids boards and an SUP. We will post photos as they near completion.

Wood love to talk about what you have in mind.

     

used surfboards myrtle beach greensboro wilmington