Our Promise To You
Our Environmental Promise: We use Forest Stewardship Council certified woods or woods salvaged from downed trees. All our boards are glassed with epoxy resin which is cleaner for our environment and emits 50-75% less Volatile Organic Compounds than polyester resin. In our shop we have moderate ventilation and no need for a mask when glassing. Epoxy is lighter and stronger than polyester. Our wood boards are nearly indestructible and should last a lifetime. Each board is quality crafted for strength, durability and concern for our environment.
Your Satisfaction Promise: Ride our boards for 30 days. If you don't like it, return it.
CONTACT: Dan Johnston BlindDogSurfboards@yahoo.com Tom Allen (01-404-229-4223) Blinddogsurfboards@hotmail.com
All images are copyright protected and my not be used without permission from Blind Dog Surfboards.
Jan 29, 2013
Here is 4 frames per minute video of this build out. This board is 23.5" wide, 3.25" thick, at nose is 18.5" and tail is 16", and has our Evo rail foils. It will have 2+1 fin array but will probably be surfed with a Bing 10" Hatchet fin only.
I started to sand with new 5" Dewalt disc sander but too much noise and did not like the results. Seems in talking with other HWS builders, there is a point where you are tired of noise and just do it by hand. Actually hand sanding is rather rewarding. You can see your work as it changes from gobs of glue and hunks of wood into something that has a bit of your soul forever in it.
Jan 27, 2013
Rails make me happy. The tapered rails I've been surfing and building are the best. I'm reminded of this every time I get out in the water. It's a lot easier to manage my board when it doesn't have those fat boaty rails. You wouldn't think it'd make much of a difference but, it does.
Tapered rails work for me for two reasons. I think it's easier to catch waves because of the board's foil shape. The only way to get that shape is with tampered rails. What I like best though is having better rail control when dropping in or turning. With a fat not so tapered rail, it's a lot harder to feel that rail. The shape of the bottom also makes a huge difference. I like some belly in the middle, nose concave and vee in the tail. Those features work better for me than a board with a flat bottom.
Ok, that's how it works for me. I love my evo and the nose rider is going to be even better. All you guys that have to run to the nose to stay in the wave know what I'm talking about.
I'm not a big wave chaser, sort of been there, done that kind of mentality but I took an Evo railed 8'4" Mini Mal out at Ocean Isle Beach pier. Took three good waves and found this foil to work really well on over head surf. It give good rail bite and really good edge control. As Dennis states it works equally good with a nose rider profile.
Jan 8, 2013
|Thought we would share with you where our readers are coming from:|