Our Promise To You
Our Environmental Promise: We use Forest Stewardship Council certified woods or woods salvaged from downed trees. All our boards are glassed with epoxy resin which is cleaner for our environment and emits 50-75% less Volatile Organic Compounds than polyester resin. In our shop we have moderate ventilation and no need for a mask when glassing. Epoxy is lighter and stronger than polyester. Our wood boards are nearly indestructible and should last a lifetime. Each board is quality crafted for strength, durability and concern for our environment.
Your Satisfaction Promise: Ride our boards for 30 days. If you don't like it, return it.
CONTACT: Dan Johnston (01-910-575-6682) BlindDogSurfboards@yahoo.com Tom Allen (01-404-229-4223) Blinddogsurfboards@hotmail.com
All images are copyright protected and my not be used without permission from Blind Dog Surfboards.
Jan 29, 2013
$1300 - Building a 9'6" Nose Rider - Sold
Here is 4 frames per minute video of this build out. This board is 23.5" wide, 3.25" thick, at nose is 18.5" and tail is 16", and has our Evo rail foils. It will have 2+1 fin array but will probably be surfed with a Bing 10" Hatchet fin only.
I started to sand with new 5" Dewalt disc sander but too much noise and did not like the results. Seems in talking with other HWS builders, there is a point where you are tired of noise and just do it by hand. Actually hand sanding is rather rewarding. You can see your work as it changes from gobs of glue and hunks of wood into something that has a bit of your soul forever in it.